Technical Document

Maintenance Guide

Daily, weekly, monthly, quarterly, and annual inspection checklists for every system in the container.

Perform these checks every operating day, before startup. Initial each item as you verify it.

SystemCheckDone
GeneratorCheck engine oil level — add if low☐
GeneratorCheck coolant level — add if low☐
GeneratorCheck fuel level — refill if low☐
GeneratorWalk around for leaks (oil, coolant, fuel)☐
GeneratorVerify DSE7310 has no active alarms☐
CompressorCheck compressor oil level — add if low☐
CompressorDrain receiver tank condensate☐
CompressorInspect for air leaks (listen while running)☐
Air DryerVerify drain valve is functioning☐
Air DryerCheck and drain coalescing filter bowl☐
Transfer PumpsVerify both pumps cycle and supply material☐
Transfer PumpsCheck for leaks at drum bungs and pump outlets☐
ReactorsVerify A and B inlet filters are clean☐
ReactorsCheck for material leaks at all fittings☐
ReactorsVerify heaters reach setpoint☐
HosesInspect all hoses for damage, kinks, abrasion☐
GunsVerify mix modules are installed and not worn☐
GunsCheck gun o-rings and seals☐
Drum HeatersVerify heaters are on and at setpoint☐
Drum HeatersVerify drums are secured with straps☐
ContainerVerify fire extinguisher present and charged☐
ContainerCheck for spills — clean any found☐
ContainerVerify all E-stops are in released position☐
ContainerVerify ventilation is adequate☐